Description

Hose Reel Guide and Slide Pro Max XL™

Name: Hose Reel Guide and Slide Pro Max XL™ - File Download
SKU: 25574
Availability: InStock

The world’s first hose-saving, hand-saving, dignity-preserving reeling accessory. Probably.

Have you ever reached the end of a long day, grabbed a pressure washer hose and thought, “I really hope this doesn’t sand my fingerprints off”?

Those days are over.

Introducing the Hose Reel Guide and Slide Pro Max XL™, an astonishing feat of modern engineering that glides effortlessly along your hose while protecting your hands from friction burns, unnecessary suffering, and the overwhelming disappointment of poor hose management.

Simply hold the Guide and Slide Pro Max XL™ around your hose while reeling in. That’s it. No complicated setup. No batteries. No Wi-Fi. Just smooth, glorious hose retrieval.

Features

🔥 Dramatically reduces friction burns while reeling in hose.
✋ Gives your hands a much easier life.
🌀 Glides smoothly along the hose with minimal effort.
💪 Designed for years of hose-guiding greatness.
🚿 Compatible with most pressure washer hoses.
🧠 Requires absolutely zero training or qualifications.
🚀 Makes reeling in hose feel at least 83% more satisfying.*

*Completely unofficial figure.

Performance

Extensive laboratory testing* has confirmed that the Hose Reel Guide and Slide Pro Max XL™ is:

Approximately 27 times better than grabbing the hose with bare hands.
94% less shouty than accidentally dragging your knuckles across a spinning reel.
Scientifically proven to make you look like you know exactly what you’re doing.
Fully capable of surviving the average pressure washer owner’s habit of throwing everything back in the van.

*Laboratory may have been a workshop.

Included

1 × Hose Reel Guide and Slide Pro Max XL™
Unlimited smoother hose retrieval.
A surprising amount of personal satisfaction.

Disclaimer

Use of this product may result in:

Reduced swearing while reeling in hose.
Fewer friction burns.
A mysterious desire to rewind every hose in sight.
Colleagues asking, “Can I have a go?”
An unjustified belief that you’ve become a professional hose management specialist.

Download it. Print it. Slide it. Reel like a champion. Your hands deserve better.

Size Chart

🖨 Recommended Print Settings (TPU 90A) For best strength and controlled clamp flex, we recommend: 🔹 Material TPU 90A (or similar semi-rigid TPU) 🔹 Layer Height 0.24 mm (recommended) 0.20 mm for slightly finer surface finish 🔹 Walls / Perimeters 4 wall loops (minimum 3) Wall line width: 0.42–0.45 mm 🔹 Infill 20% Gyroid (Do not go below 15% for structural strength) 🔹 Top / Bottom Layers 4 top layers 4 bottom layers 🔹 Print Speeds (TPU Safe Range) Outer wall: 120–150 mm/s Inner wall: 150–220 mm/s Infill: 180–250 mm/s Avoid high-speed / “Sport” modes 🔹 Cooling Moderate cooling (30–50%) Avoid excessive cooling for best layer bonding 🔹 Bed Adhesion Clean PEI plate Brim optional if bed adhesion issues occur ⚙ Strength Notes 4 walls provide most of the structural strength. Infill primarily supports internal stability. The clamp is designed to allow slight flex when printed in TPU 90A. For a more rigid version, print in PETG using the same wall/infill settings. 🚐 Use Case Recommendation For van-mounted installations: Do not reduce wall count below 3. Do not use flexible TPU softer than 90A. Ensure bolts are tightened with washers to distribute load.