easyfoam365+ product line has been enlarged
The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing.
This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry.
The cleaning capacity when cleaning and rinsing is not affected at all.
A lever makes it possible to change from the cleaning and rinsing mode into injector operation.
When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode).
When using the injector the available water quantity is guided through the injection area.
In order to produce foam a foam lance without air intake is absolutely required.
The air quantity needed for foaming is supplied by an additional connection positioned at the injector.
The use of a spray gun with large cross section areas such as for example ST-2720, ST-2725, ST-3100 or ST-3300 with suitable lances and foam hoses (blufood) is recommended.
The injector ST-168 is especially designed for low and medium pressure applications from a water inlet pressure of 5 bar and it generates an excellent foam when being provided with the required quantity of compressed air.
The easyfoam365+ injector which is available in the nozzle size of 1.2 – 2.8 mm meets the requirements in every field of application in the professional cleaning industry.
The dosing is adjusted by one of the 10 nozzle inserts which are included in the consignment.
As an alternative there are also versions with the infinitely variable dosing unit ST-161 available.
The connection for chemicals equipped with an integrated check valve and an intake for the nozzle inserts has a hose connector for chemical suction hoses being 9 mm in diameter in order to suck in especially viscous fluids.
The direction of flow is marked with arrows to guarantee a smooth installation.
1/2″ F : 1/2″ F. Injector ST-168 with metering valve ST-161 and compressed air module (hose tail 9 mm).
Max. 350 bar / 100 °C